CCNA Questions
1. Changing VTP information must be done in:
1. Server Mode
2. Client Mode
3. Transparent mode
4. None
2. Which mode is only locally significant?
1. Server Mode
2. Client Mode
3. Transparent mode
4. None
3. Performing a POST is ____step of router Boot sequence:
1. First
2. Second
3. Third
4. Fourth
4. NovellIPX is in use since:
1. 1970
2. 1980
3. 1985
4. 1990
5. Netware servers provide the following services:
1. File
2. Print
3. Message
4. Application
5. All
6. How many types of IPX SAP filters:
1. One
2. Two
3. Three
4. Four
7. Certain SAP entries are stopped from entering a router by:
1. IPX Input SAP filter
2. IPX Output SAP filter
3. None
8. There are _____types of WAN connections:
1. One
2. Two
3. Three
4. Four
9. ISDN has _______reference points:
1. One
2. Two
3. Three
4. Four
10. _____events must take place to set up Basic Rate Interface (BRI):
1. One
2. Two
3. Three
4. Four
11. To configure the route-on-stick for inter-VLAN routing, you need to do:
1. Enable ISL, trunking on the switch port the router connects to
2. Enable ISL encapsulation on the router’s subinterface
3. Assign an IP address to the subinterface and other logical addressing if applicable
4. All
12. _____steps are needed to describe low DDR works when an interesting packet in received in a router interface:
1. One
2. Two
3. Three
4. Four
5. Five
13. ISDN BRI also known as:
1. 2B+1D
2. 1B+2D
3. 1B+D
4. None
14. The BRI B-Channel service operates at:
1. 64 Kbps
2. 16 Kbps
3. 128 Kbps
4. None
15. The BRI D-Channel operates at:
1. 64 Kbps
2. 16 Kbps
3. 128 Kbps
4. None
16. Reference Point between Non-ISDN equipment (TE2) and a TA is called:
1. U Reference Point
2. T Reference Point
3. S Reference Point
4. R Reference Point
17. Devices connecting to the ISDN Network are known as:
1. Terminal equipment
2. Reference point
3. ISDN switches
4. None
18. The components used with ISDN are:
1. Function
2. Reference Points
3. Switches
4. A& B
|
