How to check administratively shutdown router interface

Freetechexams#show interface s0/0

 Serial0/0 is administratively down, line protocol is down

  Hardware is PowerQUICC Serial

  Internet Address is 1.1.1.1/8

  MTU 1500 bytes, BW 1544Kbit. DLY 20000 usec,

    Reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation HDLC, loopback not set

Keepalive set (10 sec)

  Last input00:01:36, output 00:01:31, output hang never

  Last clearing of”show interface” counters never

  Input queue: 0/75/0 (size/max/drops); Total ouput drops:0

  Queueing strategy: weighted fair

  Output queue: 1/1000/64/0 (size/max total/threshold/drops)

    Conversations 1/2/256 (active/max active/max total)

    Reserved Conversations 0/0 (allocated/max allocated)

  5 minute input rate 0 bits/sec, 0 packets/sec

  5 minute output rate 0 bits/sec, 0 packets/sec

    2099 packets input, 132701 bytes, 0 no buffer

    Received 1275 broadcasts, 0 runts, 0 giants, 0 throttles

    1 input errors, 0 CRC, 1 frame, 0 overrun, 0 ignored, 0 abort

    4662 packets output, 327532 bytes,0 underruns

    0 output errors, 0 collisions, 6 interface resets

    0 output buffer failures, 0 output buffers swapped out

    4 carrier transitions

DCD=up DSR=up DTR=down RTS=down CTS=up