increasing your wireless network’s signal strength

this article shows you how to get the most from your network, by improving the signal.

• To start of, obstacles such as thick walls, appliances, microwaves can greatly reduce the range and effectiveness of wireless networks but this problem can be remedied to a degree by tying together multiple wireless access points (WAPs) or routers.

• Angles can have a huge effect of how the router perceives thickness of a wall. So try to keep it upright and on a flat, unbiased surface. Placing it high will yield very good results. Try to keep all networked devices away from power cables, 2.4ghz wireless phones and microwaves, electrical devices that generate RF noise. ( upgrade wireless phones to 5.8 Ghz to avoid interference).

• The wireless network builder provides extenders which can improve signal strength, so using them is a good idea. Also by adding a wired connection between two wireless hub, you can greatly increase range and signal strength throughout the premises.

• Try upgrading your network interface card, using an external usb connection works great.

• Buy a wireless repeater which enhances signal strength.

• Try changing your wireless channel (go through your routers manual to see how)

• Change the router channels via  router configuration software.

• Most importantly remember location is everything. Place the router where it is safe from interferences and obstacles and the higher you place it the better the signal will be.